Rear panel
Note: The Nokia A032
has no integral power
switch – switch on
and off at the wall
outlet or by removing
the power connector
from the rear of the
unit.
WARNING: Use of a
power unit other than
that supplied with the
Nokia A032 may result
in unreliable operation
or permanent damage
to the unit and will
void the warrantee.
8
After unpacking the unit, look at the rear panel
and identify the various connectors:
PCMCIA
slot
•
Power connector
the power unit. Only use the power unit
supplied with the Nokia A032.
•
RJ45 (10baseT) connector
the LAN connection.
•
PCMCIA slot
Nokia C111 Wireless LAN Card.
•
– The serial port can be used for
Serial port
a number of functions depending on the
application:
• Modem connection for Internet access
• Management functions
• Diagnostics
• Downloading new firmware.
serial
port
RJ45
(10baseT)
connector
– This is where you connect
– Use this to make
– This is where you insert the
Nokia A032 Getting Started
power
connector