Nokia A032 Getting Started Manual: Configuring Devices To Accept Automatic Ip Addresses

Wireless access point.
Hide thumbs
Configuring devices to accept automatic IP
Supplementary information
By default, Windows clients are set to accept IP
addresses automatically. However, if a station
has subsequently been configured with IP
information, you'll need to reset the defaults
before the Access Point DHCP server can
provide the correct configuration:
Use the Windows Network control panel to
Obtain an IP address automatically
If necessary, delete any entries under the
Gateway and DNS Configuration tabs
(although DNS should still be enabled).

   Also See for Nokia A032

   Related Manuals for Nokia A032

Comments to this Manuals

Symbols: 0
Latest comments: