Redial; Redial The Last Number Called; Delete A Redial Number; Find Handset (Paging) - Telstra Slim Touch 9650 User Manual

Using the phone

Redial

Up to 20 of the last telephone numbers called
are saved in the redial list. You can select any of
the numbers to redial or delete.

Redial the last number called

1. Press , The last number you called will be
displayed.
2. Press or to dial the number displayed.

Delete a redial number

1. Press , then press
the number you want to delete.
2. Choose to delete the selected entry

Find handset (Paging)

You can ring a handset to help locate it.
1. Press on the base. All handsets registered
to the base will ring for up to 60 seconds. The
--PAGING--
display shows
2. Press on the base again to stop the paging
if handsets are on the base or press or
, or any dial pad key (0-9, *, or #) on any
handset, if it's off the base.
NOTE: If there is an incoming call during paging, paging
will cease and the phone will ring with the incoming
call instead.
24

Temporary ringer silencing

Press or
silence the ringer temporarily. This will silence
the ringer without disconnecting the call. The
next incoming call will ring normally at the
preset volume.
NOTE: Each handset will ring when there is an incoming
call unless the ringer volume is turned off. Pressing
or
that particular handset.

Chain dialing

to move to
This feature allows you to initiate a dialing
sequence from numbers stored in the
phonebook, call list history or redial list while
you are on a call.
Chain dialing can be useful if you wish to access
numbers other than phone numbers (such as
bank account information or access codes) from
the phonebook, call list history or redial list.
while the telephone is ringing to
on one handset will only silence the ringer of