Cid List (Caller List - Clip); Generalities; Display At Incoming Call - AEG Spirit 100 User Manual

CID LIST (caller list - CLIP)

Generalities

The CLIP – function offers the following possibilities:
1. Identifying the caller before accepting a call;
2. Registering the last 5 calls with the number of the caller in the CID list;
3. Consulting the CID list, finding the last calls entered with the date and time
of the call and the telephone number of the caller;
4. Scrolling through the CID list;
5. Dialing a number from the CID list;
6. Erasing a number from the CID list.
Remark:
You may need to subscribe caller ID service with your local provider.
When your operator has activated the CLIP – function, when a call
comes in, the telephone number appears on display, toggling every
quarter of a second with date and time. This will not be the case
when the number is not transmitted resp. when the caller has
blocked the transmission (CLIR).
Your set shows the number of the incoming call, as well as the day and the hour
of the call, if the telephone network provider has activated this feature and if the
caller did not hide his number (with the CLIR – function).
When the network operator also sends the date and time, the internal clock of
your set will be adjusted automatically when the first call enters. Many opera-
tors, however, only send the number. In order to have a correct registration of
the date and time that a call entered, you will have to adjust the clock as de-
scribed.

Display at incoming call

If the number is not transmitted resp. the caller has blocked the transmission
(CLIR), the call is displayed with hyphens:
If the telephone number is received, the first 12 digits of this number appear on
the display, toggling with the date and time, e.g.:
072162690602
AEG Spirit 100 05.06 gc_de
25-05 15:14
toggling with
------------
27