Setting Date And Time - AEG Spirit 100 User Manual

1. After confirmation of the previous setting, the actual volume (left) and mel-
ody (right) for internal calls appear; e.g.:
2. Press the scroll-keys
numeric key for choosing the melody (1 – 5). Example for volume 1 and
melody 4:
Press P to save the input values.
3.
4. The program automatically continues with the setting of date and time, as
described in the next chapter.
5. The handset returns to stand-by mode by pressing the "hang-up" – key

Setting date and time

Remark:
This setting is only possible after having made the setting described in the pre-
vious chapters.
You can input the actual time and date. Only if you do so, date and time will ap-
pear in the CID – list, indicating when a call entered. When the telephone op-
erator transmits date and time, the actual values will be set by the first incoming
call.
1. After confirmation of the previous setting, the actual date (left) and time
(right) appear on display and the first digit of the date blinks; e.g.:
2. Press the scroll-keys
choosing the position to overwrite. The numeric keys allow overwriting date
and time; e.g.:
Press P to save the input values.
3.
4. The program automatically continues with the setting of the dialing mode,
as described in the next chapter.
5. The handset returns to stand-by mode by pressing the "hang-up" – key
Remark:
If a handset is not registered to a base, the programming mode stops after the
setting of date and time, and the handset returns to stand-by. All further de-
scribed settings are only possible with a handset, registered to a Spirit 100
base.
16
S T
for changing the volume (0 – 5) and press a
S
T
to move the cursor to the left resp. right, for
-3-
-1-
15-05 18:35
15-05 18:48
AEG Spirit 100 05.06 gc_de
-5-
-4-
Q
.
Q
.