Using The Virtual Keyboard - Avermedia AVerDiGi SEB5108H Series User Manual

The hard disk must be formatted before user can use it with DVR unit. Following the below steps
5.
to format the hard disk.
a. Click
Click System → System and click Next.
b.
c. Click Refresh button to detect the installed hard disk.
d. Select the hard disk that user wants to format it.
e. And then, click Format to start formatting.
Setup the date and time in order to have correct system time and date. Following the below
6.
steps to setup date and time:
a. Click
b. In Time section, click Setting button of System Time.
c. Select the date and adjust the time, and then, click OK.
Setup the Schedule to record.
7.
a. Click
b. Select the date and type of record (Weekly, Month, or None).
c. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and
hours table.
d. Click Save and click Record tab.
e. Select the record mode (Always, Motion, Sensor, or Smart) and date.
f. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and
hours table.
g. Click Save and OK to complete the record schedule setting.
8. To start recording, click

2.2.1 Using the Virtual Keyboard

Use the Virtual Keyboard and mouse to configure the DVR system. Just click
the column and right-click to call out the virtual keyboard. For uppercase, click Caps button. To exit,
click left-click anywhere on screen.
to call out SETTING MENU.
and select System → System and click Next.
→ Setting → Schedule → System
(record) button.
20
or select