Table of Contents
Advertisement
SECTION 4: ASSEMBLY
Fence
Most of your G1258 20'' bandsaw has been
assembled at the factory. Only the fence assem-
bly requires installation.
To mount the fence to the bandsaw table:
1.
Mount the front rail to the table using the 2
5
1
⁄
-18 x 2
⁄
'' Cap Screws and the 2 Spacers
16
2
provided. See Figure 2.
2.
Loosen the fence lock knob and slide the
fence onto the rail.
DO NOT attempt any step of assembly,
adjustments, or maintenance while your
Model G1258 is running. Ensure that the
switch is off, power is disconnected and
moving parts have stopped before making
adjustments. Failure to comply may result
in serious personal injury.
G1258 20" Bandsaw
Figure 2. Front rail in place and fence installed.
-9-
Advertisement
Table of Contents
