Table of Contents
Advertisement
Configuration menu
The 882 provides many adjustment options in addition to the basic controls.
You can access these functions in AMP Setup. To open the menu, press the AMP
or SETUP buttons. To navigate within the Setup, use the LEFT or RIGHT buttons on
the remote control, or use the input selector on the front panel. Press the OK or
the ENTER button to confirm a setting. The new setting will then be applied. In
the menu you can use the SETUP button to navigate back, i.e. to move back one
level without changing any settings. To quit Setup, press the SETUP button
repeatedly until the standard display reappears.
The available settings are shown as follows:
AMP SETUP
(1-5, 1-9 when linked to 820S)
Balance
(± 5dB)
Speakers
(On/Off)
Volume Display
(dB or numeric)
Max. Volume
(0dB to -20dB)
Mute Level
(-40dB to -80dB)
Brightness
(75%/50%/25%)
Reset to Default
(Yes/No)
15
882 Integrated Amplifier
Inputs
Name
Enable
(Yes/No)
Pre Gain
(±10dB)
Advertisement
Table of Contents
