Inputs; Name (Input Name); Enable (Activating Inputs) - Lindemann 882 Owner's Manual

Inputs

In addition to the general configuration described earlier, which works equally
on all inputs, you also have the option of adjusting individual inputs to match
different signal sources.

Name (input name)

You can assign whatever name you wish to the inputs. Press the LEFT or RIGHT
button to select the desired input (1-5) and confirm by pressing OK. Now select a
name from the list or enter a name, by confirming CUSTOM. A< will now appear
in the display, at which point you can enter the name you want to use. Use the
UP or DOWN button to select letters or special characters. Use the LEFT or RIGHT
button to move to the letter you wish to change. Names may be up to 8
characters in length. Once you have finished entering the name, confirm it with
the OK button.
If you have an 820 connected to your system (SYSCOM), the names of its digital
inputs will appear on the 882. You can only change the names of the digital
inputs via the DAC menu on the 820.
Possible names to use:

Enable (activating inputs)

It is always advisable to disable any inputs that are not being used. When
selecting inputs, any input that has been disabled will be skipped.
Pre Gain (input sensitivity)
You can adjust the input sensitivity of each input separately. This can be useful
when the output levels of your source are different. The available adjustment is
±10dB.
CUSTOM
CD
SACD
DVD
TUNER
PHONO
TAPE
AV
17
882 Integrated Amplifier
TV
SAT
PC
AUX
D680
820
820S
822