Remote Control - Lindemann 882 Owner's Manual

Remote control

Power button
1.
Switches the unit on and off from standby.
Menu selection
2.
Selects the amplifier's configuration menu.
Mute
3.
Reduces the level of the outputs to zero.
Navigation cluster
4.
Normal operation:
UP/DOWN:
LEFT/RIGHT:
OK:
Menu selection:
UP/DOWN/LEFT/RIGHT: Selects menu items
OK:
Info
5.
Press the INFO button to see all the important basic settings in
the alpha-numeric display.
When using the remote control, always point it directly at the
Integrated Amplifier. Please remember that direct sunlight or
artificial light (particularly fluorescent lighting) can affect the
signal.
If you notice a decrease in the range of the remote control, this
is normally a sign that the batteries are weak. Always replace
batteries with new ones of the same type.
To change the batteries, open the battery compartment cover
on the rear of the remote handset. Take out the discharged
batteries and replace them with new ones of the same type
(Alkaline AAA), making sure that they are positioned as shown
on the drawing in the battery compartment.
Please dispose of your used batteries carefully. Stores that sell
batteries should provide containers for the collection of used
batteries. You can also dispose of them at your nearest
recycling centre.
Volume adjustment +/-
Input selection
Confirms your selection
Confirms your selection
10
882 Integrated Amplifier
1
2
3
4
5