Balance
Adjust the balance with the LEFT or RIGHT button on the remote, or the input
selector knob on the front panel. The balance can be adjusted to the left or right
in ten steps. The centre is the neutral setting. One step alters the balance by 0.5
dB. The maximum available adjustment is ± 5dB. Press OK to confirm your
selection.
Volume Display
You can display the volume either as a number or in dB. In Numeric mode, the
volume is shown from 0 to 80. In Decibel mode, the volume is shown from -80 to
0dB. Choose the type of display you prefer using the LEFT or RIGHT buttons. Press
OK to confirm your selection.
Max. Volume
Max. Volume lets you limit the maximum listening volume anywhere between
0dB (max. volume) and -20dB (party setting/child-proofing). Set the maximum
volume in 1dB steps using the UP or DOWN button. Press OK to confirm your
selection.
Mute level
Set the mute level in 1dB steps using the UP or DOWN button. Press OK to
confirm your selection.
Display Brightness
When you start using the 882, its display is set to maximum brightness. After
about 15 seconds, the display changes to the brightness setting you have
specified in the display brightness menu. To avoid wearing out the display
prematurely, do not set the display brightness too high.
You can choose three brightness levels (75%, 50% or 25%) using the LEFT or
RIGHT buttons. Press OK to confirm your selection.
Reset to default (factory settings)
Use this option to restore the configuration menu to the standard settings. To
carry out a reset, choose Yes following the warning message, and confirm with
the OK button.
16
882 Integrated Amplifier