Configuration Menu - Lindemann 832 Owner's Manual

Configuration menu

Configuration menu
The 832 provides many adjustment options in addition to the basic controls. The 832 provides many adjustment options in addition to the basic controls.
You can access these functions in AMP Setup. To open the menu, press the AMP You can access these functions in AMP Setup. To open the menu, press the AMP
or Setup buttons. To navigate within Setup, use the LEFT or RIGHT buttons on the or Setup buttons. To navigate within Setup, use the LEFT or RIGHT buttons on the
remote control, or use the input selector on the front panel. Press the OK or the remote control, or use the input selector on the front panel. Press the OK or the
ENTER button to confirm a setting. The new setting will then be applied. In the ENTER button to confirm a setting. The new setting will then be applied. In the
menu you can use the Setup button to navigate back, i.e. to move back one level menu you can use the Setup button to navigate back, i.e. to move back one level
without changing any settings. To quit Setup, press the Setup button repeatedly without changing any settings. To quit Setup, press the Setup button repeatedly
until the standard display reappears. until the standard display reappears.
The available settings are shown as follows: The available settings are shown as follows:
AMP SETUP
Balance
(± 5dB)
Gain
(0dB/+10dB/+20dB)
Monitor
(On/Off)
Volume Display
(dB or Numerisch)
Max. Volume
(0dB to -20dB)
Mute Level
(-40dB to -60dB)
Absolute Phase
(0°/180°)
Brightness
(75%/50%/25%)
Reset to Default
(Yes/No)
14 14
832 Stereo Control Amplifier
Inputs
(1-5 with 820 Link 1-9)
Name
Enable
(Yes/No)
Pre Gain
(-6dB/0dB/+6dB)
Phase
(0°/180°)
Fix to 0dB
(Yes/No)