GE Simon XT User Manual page 30

3. Scroll until the display shows Panel Piezo Alarm, and then press OK. The
current value of this option flashes (On or Off).
4. Scroll to the desired value, and then press OK.
5. Press Status repeatedly to exit.
Status beep volume. This option sets the volume of nonalarm beeps. The numerical
range is 1 to 10. The default value is 7. To program status beep volume:
1. Enter the System Programming menu.
2. Scroll until the display shows Siren Options, and then press OK.
3. Scroll until the display shows Status Beep Volume, and then press OK. The
current value of this option flashes (1 to 10).
4. Scroll to the desired value, and then press OK.
5. Press Status repeatedly to exit.
Speaker volume. This option sets the volume of the panel speaker for key presses
and alarm sounds. The numerical range is 1 to 8. The default value is 8. To program
status beep volume:
1. Enter the System Programming menu.
2. Scroll until the display shows Siren Options, and then press OK.
3. Scroll until the display shows Speaker Volume, and then press OK. The current
value of this option flashes (1 to 8).
4. Scroll to the desired value, and then press OK.
5. Press Status repeatedly to exit.
26 Simon XT User Manual