Alpine INA-W910 Owner's Manual page 129

When Connecting External Equipment
(White/Brown)
(White/Brown)
(Orange/White)
System Switch
When connecting an IMPRINT audio processor or divider
using Ai-NET feature, place the switch in the EQ/DIV
position. When no device is connected, leave the switch in
the NORM position.
• Be sure to turn the power off to the unit before changing the switch
position.
AUX I/O / Camera Input Connector
Camera Input RCA Connector (CAMERA IN)
Use when connecting an optional camera with RCA video
output connector.
Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
Video/Audio Input Connectors (AUX INPUT)
iPod (V)/AUX Input Connector
Input the iPhone/video compatible iPod audio/video signal
or AUX video/audio signal.
• Set "AUX2 IN" to "AUX" in "Setting the AUX2 Mode" (page 67)
when normal AUX video/audio is input.
• When you use this connector as normal video/audio input connector
(AUX 2 Input), an optional AV/RCA interface cable should be used.
For details, refer to .
REMOTE OUT REMOTE IN
REMOTE IN REMOTE OUT
REVERSE
Use only when back-up camera is connected.
• Configuration commercially available 4-pole mini AV plugs is not
unified.
Direct camera HCE-C117D, etc.
(sold separately)
To Video Output terminal
Camera with RCA video output
(sold separately)
To Audio Input terminal
Rear monitor
(sold separately)
To Video Input terminal
To Video Output terminal
TV Tuner
(sold separately)
To Audio Output terminal
To Video Output terminal
DVE-5207, etc.
(sold separately)
To Audio Output terminal
(White/Brown)
(White/Brown)
AV/RCA interface cable (4-pole mini AV plug to
3-RCA) (sold separately)
Usable 4-pole mini AV plug
Wiring convention of this system is as follows:
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
129
-EN