Tooth Set; Tooth Type - Grizzly G0668 Owner's Manual

Tooth Set

Three common tooth sets are standard, wavy,
and raker (see Figure 13), each removing mate-
rial in a different manner to make the kerf in the
workpiece.
Alternate Wavy
Figure 13. Bandsaw tooth sets.
Alternate: An all-purpose arrangement of bend-
ing the teeth evenly left and right of the blade.
Generally used for milder metals.
Wavy: Generally three or more teeth in a group
that are bent one way, followed by a non-set
tooth, then another group bent the other way.
Recommended for straight cuts in thin metals or
thin-wall tubing.
Raker: Three teeth in a recurring group—one
bent left, next one bent right, and then a non-set
tooth. The raker is ideal for most contour cuts.
-20-

Tooth Type

The most common tooth types are described
below and illustrated in Figure 14.
Standard or Raker: Equally spaced teeth set
a "0" rake angle. Recommended for all purpose
use.
Raker
Variable Pitch (VP): Varying gullet depth and
tooth spacing, a "0" rake angle, excellent chip
removing capacity, and smooth cutting.
Variable Pitch with Positive Rake: Varying gul-
let depth and tooth spacing, a positive rake angle,
better chip formation, and aggressive cutting.
Hook or Claw: Wide gullets (round or flat), equal-
ly spaced teeth, positive rake angle, and fast cut
with good surface finish.
Skip or Skip Tooth: Wide, flat gullets, a "0" rake
angle, equally spaced teeth, and recommended
for non-ferrous materials.
�������������������
�������������������
����������������������������
��������������
��������������������
Figure 14. Bandsaw blade tooth types.
G0668 20" Vertical Metal-Cutting Bandsaw