Dust Collection - Grizzly G0661 Owner's Manual

26.
Figure 25.
27.
Figure 26.
Figure 25
Figure 26

Dust Collection

DO NOT operate the Model G0661 without an
adequate dust collection system. This saw
creates substantial amounts of wood dust
while operating. Failure to use a dust collec-
tion system can result in short and long-term
respiratory illness.
Components and Hardware Needed:
Recommended CFM at Dust Port: 150 CFM
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine the
CFM at the dust port, you must consider these
variables: (1) CFM rating of the dust collector,
(2) hose type and length between the dust col-
lector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines
throughout the system. Explaining how to cal-
culate these variables is beyond the scope of
this manual. Consult an expert or purchase a
good dust collection "how-to" book.
To connect a dust collection hose:
1.
Figure 27
2.
Note: A tight fit is necessary for proper
performance.
Figure 27.
Qty