Pico Macom SIRD-FTA-2 Owner's Manual page 24

SIRD-FTA-2
• When you select "TV Channel / Radio Channel"(timer setting for
channel change and Wakeup channel / date), you have further
options to set:
• Wakeup Channel: Press [OK] to enter the channel list.
Deselect the channel you want to see with [CH▲/▼]. Press
[OK] to confirm it.
• Wakeup Date: Use number buttons to input your wakeup
date.
• On Time: Use number buttons to input your wakeup time. If
date and time are reached, no matter if the system is in stand-
by mode or in playing mode, it will automatically switch to
the channel you set and start playing. Duration: Here you can
set the time you want to see or play this channel. When the
time is reached, whenever the system is in standby mode or
playing a channel, the system will automatically switch to the
channel you select and play the channel within the
duration time set. The minmum duration unit is one minute.
After the duration time, the system will automatically switch to
Standby mode.
• When you select "Message"(reminding message) option in "Timer
Service", you can enter additional data:
• Wakeup Message: Press [VOLt/u] to select the category of
the wakeup message from Birthday, Anniversary and General.
• Wakeup Date: Use the [Number] buttons to input your wakeup
date.
• On Time: Use the [Number] buttons to input your wakeup
time. If date and time are reached, no matter if the system is
in standby mode or in playing mode, it will automatically show
a reminding message. The message will be displayed on the
screen until you press [Exit] to close it.
• Duration: Here you can set the time you want to see or play
this channel. When the time is reached, whenever the
system is in standby mode or playing a channel, the system
will automatically switch to the channel you select and play
the channel within the duration time set. The minmum
duration unit is one minute. After the duration time, the
system will automatically switch to Standby mode.
• Press [Exit] to leave the "Timer" menu.
2. Local Time Setting: When you select "Local Time Setting" and press [OK],
you will see a window like the one shown beside:
• GMT Usage: This item is used to set the time by using the time signal
from the satellite. Press [VOLt/u] to change the setting.
24
www.picomacom.com
PICO MACOM
5.3
CONTACT US TOLL FREE 800-421-6511