Table of Contents
Advertisement
PICO MACOM
2.20 TXT
1. Press [TXT] button in TV mode to open the teletext page. This service is
depending on the support of the channel provider.
2. If the channel does not support teletext information, it will show "No
Teletext Data" on the screen.
2.21 INFO
In TV mode, press [INFO] button to open information screen. The window
shows the parameters of the current channel.
Two dynamic bars at the bottom of the window reflect the signal intensity and
signal quality of the current channel.
2.22 TV/Radio
In TV mode, press [TV/Radio] to switch to Radio mode. In Radio mode press
[TV/Radio] again to switch back to TV mode.
2.23 Recall
Pressing the [Recall] button allows you to toggle between the actual and the
last selected channel.
2.24 SAT
1. In TV mode, press [SAT] button to open satellite list, select, then press
[OK] to open "TV Channel List" menu, select channel.
2. In TV mode, press [Page Up/Down] to switch directly between satellites.
2.25 LNB Short
When LNB is shorted, it will notify user on screen "LNB Short!" Please check
your cables and connections for shorts. When the short is removed, the
warning message will disappear.
3. Channel
Press [Menu] in the TV/radio mode to enter the main menu.
1. Press [CHp/q] to select the channel item.
2. Press [OK] to enter the selected item.
CONTACT US
858.546.5050
SIRD-FTA-2
2.20
2.21
2.24
3
www.picomacom.com
11
Advertisement
Table of Contents
