Find; Radio Channel List; Channel Setup; Favorite Group List Name - Pico Macom SIRD-FTA-2 Owner's Manual

Free-to-air digital satellite receiver
Table of Contents

Advertisement

PICO MACOM

3.1.5 Find

1. Press [Blue] button to open the "Find" window as shown
beside. Press [CHp/q] / [VOLt/u] to select the leading
character of the channel name and press [OK] to confirm it.
2. After entering the character(s), highlight "OK" in the window and
press [OK] on the RCU.
3. Press [Exit] button to close the find window and brings you back
to the channel list.

3.2 Radio Channel List

Basically the operation of "Radio Channel List" is the same as "TV Channel
List", except that in the small channel window, the radio Logo will be dis-
played.

3.3 Channel Setup

When you enter the "Channel Setup" menu, you will see a screen like shown
beside:
1. Startup Channel: Press [OK] to enter "Startup Channel" menu to see the
screen as shown beside:
• If you set of "Boot on Channel" to "On" you can edit the following
two items. If the setting is "Off", the box always starts with the chan-
nel that was running when the box had been switched off.
• On the "Mode" item, you can select either "TV channel" or "Radio
channel".
• On "Startup Channel", item you can open the channel list by pressing
[OK]. Then you can select the channel of your choice.
Press [OK] again to confirm.
2. Channel Play type: Use [CHp/q] to select, press [OK] to enter "Channel
Play Type" menu. Here you can select the "playing channels" as "All",
"Free" or "Scrambled" with [VOLt/u].
3. If you select "Free" , all scrambled channels will be skipped when you
change channels with [VOLt/u].
4. Press [Exit] to leave the "Channel Setup" menu.

3.4 Favorite Group List Name

When you enter "Favorite group list name" menu, 8 favorite group will be
displayed, press [OK] on the RCU to rename favorite group. Use [CHp/q] /
[VOLt/u] to select character, press [OK] to confirm it.
After modification select "OK" of button bar and press [OK] on the RCU to
rename the favorite group name and leave the edit mode. Press [Exit] on the
RCU to exit the edit mode without saving the favorite group name.
CONTACT US
858.546.5050
SIRD-FTA-2
3.1.5
1
2
3
3.4
www.picomacom.com
15

Advertisement

Table of Contents
loading

Table of Contents