Factory Default; Software Upgrade - Pico Macom SIRD-FTA-2 Owner's Manual

SIRD-FTA-2
• Play the game:
• Press [VOLt/u] / [CHp/q] to guide the snake to the red
blocks. Every block eaten increases the length of the snake. If
the snake runs against a wall or against itself, it dies.
• Press [OK] to Pause/Play the game.
• Press [Exit] to quit the game and return to the game menu.
3. Othello
• Mark "Setup" and press [VOLt/u] to select the game level
(degree of difficulty).
• Mark "Start" and press [OK] to start the game.
• Mark "Cancel" and press [OK] to leave the game.
• Play the game:
• Press [VOLt/u] / [CHp/q] to position the round mark.
• Press [OK] to set your stone.
• Press [Exit] to quit the game and return to the game menu.

6.4 Factory Default

When you press [OK] on the "Factory Default" item:
1. A dialogue box will occur where you need to enter the password.
2. After you input the correct password, a warning message will be displayed
like the one shown beside.
3. If you select "Yes", all changes made will be reset to default values. Make
sure you really want to do this!
4. Press [Exit] in both steps to close the window without resetting
the receiver.

6.5 Software Upgrade

When you enter to "Software Upgrade" menu, you will see a screen like
shown beside:
1. Press [CHp/q] to select the wanted items between Software Upgrade
and Upgrade by Satellite.
2. Press [OK] to enter the selected item.
28
www.picomacom.com
PICO MACOM
3.
6.4
6.5
CONTACT US TOLL FREE 800-421-6511