Osd Setting; Parental Lock - Pico Macom SIRD-FTA-2 Owner's Manual

PICO MACOM
• The "GMT Offset" item is only available when "GMT Usage" is set to "On". Press [VOLt/u] to set the
"GMT Offset" value. With every time you press the button, the time offset will be increased/decreased by
half an hour.
• Summer: Press [VOLt/u]to switch this function "On" or "Off".
• "Date" and "Time" items are only available when the "GMT Usage" is set to "Off". Press [VOLt/u]
to select one item and use number buttons to input time and date.
• Time Display: Press [VOLt/u] to switch this function "On" or "Off".
• NOTE: If the current channel provides the correct time information, you will see the current time after you
entered "Local Time Setting" menu. If the channel doesn't provide time information, you have to input
the date and time information manually. Most channels support the time signal.
• Press [Exit] to leave the "Time" menu.
3. Sleep Timer: Select "Sleep Timer" item and press [OK] to set the sleep timer. You will see "Sleep timer OFF
/ Sleep timer 10 / Sleep timer 30 / Sleep timer 60 / Sleep timer 90 / Sleep timer 120". If you set a sleep time,
the system will change to standby mode after the chosen time period.

5.4 OSD Setting

When you select "OSD Setting", you will see a screen as shown beside:
1. Subtitle Display: Press [VOLt/u] to select "Off", "Standard" or "Teletext
Subtitle". If the current channel has subtitle information, it will be
displayed if this function is "Standard" or "Teletext Subtitle". If this
function is "Off", subtitles won't be displayed.
2. OSD Timeout: This setting determines the duration that the info window
is displayed on the screen when you change channels. Press [VOLt/u]
to set the time between 1 to 10 seconds.
3. Position: Press [VOLt/u] to select the position between top and
bottom.
4. OSD Transparency: With this parameter, you can set the transparency
of the menus. Press [VOLt/u] to select the value between 10%, 20%,
30%, 40% and "Off"(means no transparency function).
5. Load OSD Setting Default: If you want to reset your OSD settings to the
default settings, select this item and press [OK].
6. Press [Exit] button to leave the "OSD Setting" menu.

5.5 Parental Lock

You can set a password for anyone who wishes to operate the "Installation"
menu. You can also set the password to lock channels. Below you find how
to set and change the password.
1. On "Parental Lock" press [OK] to open a dialogue box and input the
password. After you entered the correct password, you will see a screen
like shown beside.
2. Menu Lock: If Menu Lock is set to "Yes", enter the password every time
you want to open the menu. If set to "No" then you can open the menu
without entering the password first.
CONTACT US 858.546.5050
SIRD-FTA-2
5.4
5.5
www.picomacom.com
25