Altigen IP 710 User Manual page 19

Line Park A parked call line
appearance can be
assigned as a
programmable Line Park
key by the administrator.
When connected to a
caller, the call can be
parked by pressing the
Line Park key. If a call is
parked at a Line Park line,
the button's light is on.
The call can be picked up
by pressing the Line Park
key.
Mute button While on a call, mutes
conversation.
Program Lets users associate a
Keys programmable key with a
speed dial number or
feature code directly from
the IP phone.
Redial button Redials a selected number
from the last16 numbers
dialed.
Release Releases a call from the
button connected state. Deletes
characters entered on the
LCD. While onhook,
releases phone from an
active state.
Ring Tones Select from one of 14 ring
tones.
Download new ring tones
from the server.
•
When configured by the system
administrator, the IP phone can
play an audible beep or one of 14
different ring tones when a call is
parked.
•
When configured by the
administrator, an alternate way to
pick up a parked call is to use #51
<line number> if Line Park is not
assigned to a programmable key.
•
The Line Park key's light will be
lit and turns off when the parked
call is picked up, the caller hangs
up, or the call is routed to IVR/
Auto Attendant.
•
If the system administrator has
allowed it, you can associate
certain programmable keys with a
speed dial number or feature code
from the IP phone menu.
•
Pressing Enter dials the number
displayed.
•
Redials up to 32 digits.
•
When a new call comes in, the
phone will exit this menu and go to
ring state. If in this menu for longer
than 20 seconds without any input,
the phone exits this menu.
•
Custom ring tones are not
supported.
IP 710 Manual 11