Overnight Cleaning - Wells WATER-MAX Owner's Manual

OVERNIGHT TANK CLEANING
Perform overnight cleaning if Deliming Procedure does not remove
scale and calcium deposits from water tank.
1. Drain and remove tank.
•
Press power switch to the OFF position.
•
Drain and remove tank from Water-Max
•
Remove tank lid from tank. Wash, rinse, and sanitize tank lid in
the 3-compartment sink. Allow to air dry. Store tank lid for later
use.
TM
2. Mix LIMESHIELD
•
Fill tank half full with hot tap water.
•
Pour 1-1/4 cup (10 ounces) LIMESHIELD
Allow to dissolve completely.
3. Soak overnight.
•
When foaming stops, fill tank to rim with hot tap water. Let the
solution soak in the tank overnight.
•
After soaking in the tank overnight, carefully drain tank. Loosen
scale deposits with scrub pad. Remove large scale deposits
through top of tank.
4. Rinse twice and reinstall tank.
•
Rinse tank thoroughly at least twice. Pour all rinse water into a
sink.
•
Put tank lid back on tank.
•
Reinstall tank on Water-Max
fully seated in socket.
•
Press power switch ON. After a short delay, tank will begin
filling.
TM
in tank.
TM
. Make sure tank connector is
OVERNIGHT TANK CLEANING
.
TM
powder into tank.
17
CAUTION:
SHOCK HAZARD
DO NOT submerge tank in
water.