Wells WATER-MAX Owner's Manual page 15

CLEANING - MONTHLY CONTINUED
Clean Faucet
1. Drain and remove tank.
•
Press power switch to the OFF position.
•
Drain all water from tank into pitcher. As each pitcher is full,
turn faucet off and dump pitcher of water into sink. It will take
approximately 6 pitchers to completely empty tank.
•
Remove tank from hot water dispenser.
2. Disassemble
•
Disassemble faucet by unscrewing
bonnet. Pull straight up on handle
to remove the bonnet assembly.
3. Clean seat and seat cup.
•
Clean seat and seat cup by wiping
with a clean sanitized-soaked
towel. Use a stiff bristle brush to
remove any heavy deposits around
the seat or inside the faucet body.
4. Reassemble.
•
Reassemble and reinstall faucet.
•
Reinstall tank on Water-Max
position.
Clean Tank Screen
1. Drain and remove tank.
•
Press power switch to the OFF position.
•
Drain all water from tank into pitcher. As each pitcher is full,
turn faucet off and dump pitcher of water into sink. It will take
approximately 6 pitchers to completely empty tank.
•
Remove tank from hot water dispenser.
•
Remove tank lid.
2. Remove and clean screen.
•
Clean screen with a bristle
brush.
3. Reinstall screen.
•
Reinstall screen in faucet
fitting.
•
Replace lid on tank.
•
Reinstall tank on Water-Max
shelf.
•
Press power switch to the ON
position.
BONNET &
PLUNGER
ASSY.
SEAT
CUP
SEAT
(inside faucet)
FAUCET
BODY
TM
shelf. Press power switch to ON
SCREEN
TM
FAUCET
FITTING
13
CLEANING INSTRUCTIONS
CAUTION:
BURN HAZARD
TM
Water in Water-Max
EXTREMELY HOT!
is