Setting Time And Day; Quick Function Keys - Paradox Esprit 642 User Manual

5.4 Setting Time and Day

How do I set the panel time and day?
1. Press the [
code to programming mode.
2. Enter the [
3. Press the [
time time =.
4. Enter the time (ask your installer whether your keypad is
configured for 12- or 24-hour time).
• If the keypad is configured for international time, enter
the time using the 24-hour clock (i.e. 4:05 p.m. =
[1][6][0][5] and then proceed to step 6.
• If the keypad is configured for US time, enter the time
using the 12-hour clock and then proceed to step 5.
5. Press the [1] key to set the time in a.m. or the [2] key to
set the time in p.m..
6. Use the [ ] or [ ] keys to select the day.
7. Press the [
will briefly read: programming in progress
and then programming mode section.
8. Press the [

5.5 Quick Function Keys

Several control panel features can be programmed quickly on
the keypad. The monitoring station or installer may ask you to
perform some of these functions.
20 User Manual
] key. The display will read: enter
ENTER
MASTER CODE
] key. The display will read: Setup
MEM
] key to save your entry. The display
ENTER
] key to exit.
CLEAR
] or [
USER CODE
01]