Table of Contents
Advertisement
MENU TREE NOTES continued:
> CROSSOVER) from 40 to 200 Hz.
The speaker size menu also allows for turning the
CENTRE, SURROUND & BACK speakers off by select-
ing NONE. Also, the BACK speaker setting allows for
SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
A/D Conversion:
24-Bit, 192 kHz Delta-Sigma
D/A Conversion:
24-Bit, up to 192 kHz Delta-Sigma
DSP Engine:
TI DA710
Power Supply:
S eparate off-line standby PSU plus & main linear power supply with toroidal power trans-
former utilizing multiple regulation stages.
Frequency Response:
20 Hz to 20 kHz +/- 0.25 dB
Low Frequency Cutoff:
High Frequency Cutoff:
THD+Noise:
< 0 .006% in DSP modes; < 0.0025% in Bypass mode 20Hz to 20kHz at maximum output
level.
Signal-to-Noise Ratio:
105dB in DSP Modes; 110dB in 2ch Bypass Mode; 22 kHz bandwidth, Ref. 1 kHz at max.
output
Input Level:
2 Vrms in DSP modes; 4 Vrms in Bypass Mode
Input Impedance:
50 kOhms for single-ended analog audio, 1K Ohms for balanced analog inputs
Output Level:
8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode.
Output Impedance:
110 Ohms
Bass Management:
2nd Order HP filter(x5), 4th Order LP filter 40 – 200 Hz Crossover Freq.
ELECTRICAL SPECIFICATIONS:
Power:
1 20VAC & 230VAC models.
Maximum power consumption: 60 Watts
Standby power consumption: <1Watt
INPUTS
Analog Audio:
4x stereo single ended/unbalanced pairs (CD, Tuner, Cable/Sat, DVD)
2x pairs single ended, unbalanced tape inputs (RCA)
2x pairs of Balanced XLR (female) inputs
0.3 Hz
(all speakers channels in Bypass mode)
1.8 Hz
(LARGE Speakers and SubWoofer in Analog, Digital or HDMI)
40-200 Hz ( variable cutoff point; default 80 Hz) SMALL speakers, except SubWoof-
er, in Analog, Digital or HDMI)
40-200 Hz ( variable cutoff point; default 80 Hz) (SubWoofer in Analog, Digital or
HDMI)
22 kHz
(all speakers, except SubWoofer, in Analog, Digital or HDMI)
180 kHz
(all speaker channels in BYPASS)
SP3 PREAMP / PROCESSOR
choosing from one or two back speakers. By turning
the BACK speakers off, the surround sound speaker
configuration becomes "5.1". By choosing only 1 BACK
speaker the configuration becomes "6.1".
Hide quick links:
Advertisement
Table of Contents
