Technical Specifications - Bryston D65Z Owner's Manual

8 channel power amplifiers
Table of Contents

Advertisement

PARAMETER
decibels of gain,
GAIN
input volts (RMS) required for nominal power output
SENSITIVITY
Individual channel inputs
INPUT IMPEDANCE
Stereo bus inputs
max. at nominal power output into 4Ω, 20-20K Hz, 1 ch driven
IMD or THD+noise
max. at nominal power output into 4Ω, 20-20K Hz, 8 ch's driven
POWER BANDWIDTH ±0.1dB
per ch with all 8 channels driven into 4 Ohm loads
NOMINAL OUTPUT
1
POWER
all 8 channels nominal power output @ 1K Hz
at 1/8 nominal output power @ 1K Hz.
all inputs open
at idle ~ Standby
including rubber feet and output connectors (W•D •H)
DIMENSIONS
excluding box & packing foam
WEIGHT
1: Output Power:
Nominal output power levels are limited by the amount of current the D130/D250 is allowed to
draw form a residential branch circuit. Power output from individual channels or from groups of
channels can be much higher when only some channels are driven to high power levels. Note
that each of the two zones, of 4 channels each, has its own power supply. Therefore, if two or
more channels are going to be driven harder than the others, it is wise to try to balance the power
demand across the two zones and thus the two power supplies.
2: D65:
Although the nominal output power per channel of the D65 is 65 Watts per channel with all chan-
nels driven, actual power output can reach 90 Watts even when all 8 channels are driven.
3: D130:
Although the nominal output power per channel of the D130 is 100 Watts per channel with all
channels driven, actual power output can exceed 140 Watts per channel when only 6 channels are
driven.
4: D250:
Although the nominal output power per channel of the D250 is 110 Watts per channel with all
channels driven, actual power output can exceed 150 Watts when 6 channels are driven, 230
Watts per channel when only 4 channels are driven or 290 Watts per channel when 3 channels are
driven.
5: Standby:
Unit is plugged in but power switch is deactivated.
300025-3
D65Z  D130Z  D250Z 

TECHNICAL SPECIFICATIONS

CONDITIONS
5
BRYSTON LTD., 677 NEAL DRIVE, P.O. BOX 2170, PETERBOROUGH, ONTARIO CANADA K9J 7Y4
8 CHANNEL POWER AMPLIFIERS
D65Z
29 dB
0.570 V
50K Ohms
20K Ohms
0.1%
1.0%
20-20K Hz
65 Watts
2
695 Watts
144 Watts
38 Watts
.65 Watts
48.26x40.8x11.02 cm
48.26x40.8x11.02 cm
19x15.78x4.34 in
13.9 Kg
(30.5 Lbs)
D130Z
D250Z
29 dB
29 dB
0.710 V
.744 V
50K Ohms
50K Ohms
20K Ohms
20K Ohms
0.1%
0.1%
1.0%
1.0%
20-20K Hz
20-20K Hz
100 Watts
110 Watts
3
1000 Watts
1100 Watts
210 Watts
230 Watts
66 Watts
110 Watts
.65 Watts
.65 Watts
48.26x40.8x11.02 cm
19x15.78x4.34 in
19x15.78x4.34 in
18.76 Kg
21.08 Kg
(41.4 Lbs)
(46.5 Lbs)
4
2011-04-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

D130zD250z

Table of Contents