APPENDIX J: FIRMWARE UPLOAD INSTRUCTIONS continued
(Note: serial number is also written on the name plate on the back of the unit)
4. Click on the File button on the screen. If the Login window opens, type the User
name: admin and Password: bryston (case-sensitive)
2
When the "DHCP Client & Server" option is selected (recommended!), then the "+" suffix at ActIP
indicates that connection has been established while "-" indicates a failed or default status.. Ipadr and
IPmsk settings are ignored in Client & Server.
3
This example screen was for a serial number equal 5. The Login window will open only once and will be
valid for the entire session (even if repeated), until the browser is closed.
after presing
SP3 display showing serial# and firmware rev#
Actual IP address (Miscellaneous menu)
"Login" window
SP3 Firmware Upload Instructions Pg. 2
2
3