Table of Contents
Advertisement
SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
A/D Conversion:
24-Bit, 192 kHz Delta-Sigma
D/A Conversion:
24-Bit, up to 192 kHz Delta-Sigma
DSP Engine:
TI DA710
Power Supply:
S eparate off-line standby PSU plus & main linear power supply with toroidal power trans-
former utilizing multiple regulation stages.
Frequency Response:
20 Hz to 20 kHz +/- 0.25 dB
THD+Noise:
< 0 .006% in DSP modes; < 0.0025% in Bypass mode 20Hz to 20kHz at maximum output
level.
Signal-to-Noise Ratio:
105dB in DSP Modes; 110dB in 2ch Bypass Mode; 22 kHz bandwidth, Ref. 1 kHz at max.
output
Input Level:
2 Vrms in DSP modes; 4 Vrms in Bypass Mode
Input Impedance:
50 kOhms for single-ended analog audio, 1K Ohms for balanced analog inputs
Output Level:
8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode.
Output Impedance:
110 Ohms
Bass Management:
2nd Order HP filter(x5), 4th Order LP filter 40 – 200 Hz Crossover Freq.
ELECTRICAL SPECIFICATIONS:
Power:
1 20VAC & 230VAC models.
Maximum power consumption: 60 Watts
Standby power consumption: <1Watt
INPUTS
Analog Audio:
4x stereo single ended/unbalanced pairs (CD, Tuner, Cable/Sat, DVD)
2x pairs single ended, unbalanced tape inputs (RCA)
2x pairs of Balanced XLR (female) inputs
Digital Audio:
4x coaxial (RCA) 75 Ohms (SPDIF),
3x Optical (TOSLINK)
2x AES/EBU inputs (XLR) 110 Ohms
1x USB 2.0 type B
OUTPUTS
Analog Outputs:
10 balanced XLR male:
Left, Centre, Right, Left Surround, Right Surround, Left Back, Right Back, Left Auxiliary,
Right Auxiliary and Subwoofer
16 sindle ended (unbalanced) RCA:
Digital Outputs:
2x HDMI
1x TOSLINK optical
Left, Centre, Right, Left Surround, Right Surround, Left Back, Right Back, Left Auxiliary,
Right Auxiliary & Subwoofer, 4 tape outputs, 2 Zone Two outputs.
SP3 PREAMP / PROCESSOR
Advertisement
Table of Contents
