Appendix J: Firmware Update/Upload Instructions - Bryston SP3 Owner's Manual

APPENDIX J
1. You must be connected to the internet and have the SP3 connected via Ethernet
cable to your local area network and powered up.
2. Open a Browser on your computer (Explorer/Chrome/Safari etc)
3. Type:
in the URL window in the top of the browser, for example sp3-999995 and press
enter on your PC keyboard
The serial number is available by pushing the left hand navigation button on the SP3
front panel, when the front panel shows the main (opening) screen:
1
Alternatively, type in the device's IP address, for example 10.0.0.50 . The IP address is shown in the
Miscellaneous submenu as "ActIP" item. This method may be necessary if the network server or router
fails to recognize the SP3 "netbios" name.
Instructions for uploading the SP3 software.
Ver .2, 23-Nov-2011
sp3-serialnumber
1
. The SP3 web page should open in your browser:
SP3 display showing the main screen
SP3 Firmware Upload Instructions Pg. 1
FIRMWARE UPLOAD INSTRUCTIONS
Main SP3 page
SP3 PREAMP / PROCESSOR