Appendix F: Web Interface Guide - Bryston SP3 Owner's Manual

APPENDIX F: WEB INTERFACE GUIDE continued
These Remote Control codes can be entered in to BR3 remote controller by pressing "Code" button
once (which lights the red LED) and then pressing three numeric buttons
the red LED is lit.
(Note: the last 2 links refer to embedded files in the SP3 and thus are always available regardless of
Internet connectivity.)
Help screen
(bottom part)
5
Numeric buttons 0-9 in the BR3 are assigned to the following buttons, in this order: MUTE=0, TEST=1, DTS=2,
DOLBY=3, 2CH=4, HDMI=5, DIG=6, SURR=7, SURR=8, STEREO=9.
Web Interface Guide Pg. 6 of 6
5
in the short succession while