4-40
Figure 4.18 Initialize and Convert Disk Wizard
Step 3. Select the disks to initialize on the Select Disks to Initialize
screen, then click Next.
The Select Disks to Convert displays next. Do not select any
disks to convert on the Select Disks to Convert Screen. Only
basic disks are used for the cluster service.
Step 4. On the Select Disks to Convert screen, click Next.
The Disk Management screen displays, as shown in
Figure
4.19. At the Disk Management screen, after the shared
disks have been initialized in the operating system, they are
now unallocated space which can then created as a new
partition.
Installing and Configuring Clusters
Copyright © 2003-2008 by LSI Corporation. All rights reserved.