Time Programs-Hot Water - York GEYSIR VARIO RANGE User Manual

REGULATION AND WARNING DEScRIPTION
PARAMETERS OVERVIEW :
Time program - Hot water
• By the keys select one of 21
programs available in this menu item.
• After pressing the
starts to flash.
• By the
the switch-on or -off time you want to
change.
• After pressing the
time display starts to flash.
• By the keys set the required
switch -on or off time.
• By pressing the
time setting.
• By the
mark the days, during which this time
program is active or inactive.
X... active
... inactive
• After pressing the
Time program menu issue.
• If you did any changes in setting, the
"Save?" question will appear on the
display
If you wish to save the changes, press
the key.
key the cursor
keys, mark
key the selected
key confirm the
keys,
key close the
ESC
... re-adjustable parameters
Warning
If there is still no day selected, by X symbol, for the
Time program, you must to set one prior to switch-on
or -off, at least.
IMPORTANT!
In times being set in Hot water Time program, in
which the service water heating is enabled, also
the circulating pump is activated (if it is installed in
your system). In time windows, set for service water
heating, at any service water temperature decrease
by more than 10 °C, under the value which you
have set in the Hot water menu item, the required
preset value is automatically switched to Hot water
operation mode!
EN
15
ENGLISH