Time Programs-Regulation Circuit 1 - York GEYSIR VARIO RANGE User Manual

REGULATION AND WARNING DEScRIPTION
PARAMETERS OVERVIEW :
Time programs - Regulation circuit 1
• By the keys select one of 21
programs available in this menu item.
• After pressing the
begins to flash.
• By the
the switch-on or -off time which you
wish to change.
• After pressing the
time display begins to flash.
• By the keys set the required
switch -on or off time.
• By pressing the
time setting.
• By the
the days during which this time program
should be active or inactive.
X... active
... inactive
• After pressing the
Time program menu item.
• If you have done any change in setting
a question will by displayed : Save?
If you wish to save the changes, press
the key.
key the cursor
keys mark
key the selected
key confirm the
keys mark
key shut the
ESC
... re-adjustable parameters
Warning
If there is still no day selected, by X symbol, for the
Time program, you must to set one prior to switch-on
or -off, at least.
IMPORTANT!
Times, being set in the Regulation Circuit 1 Time
program, does not cause any equipment switching
-off, at room thermostatswitching-on, but the result
will be instead that the required values will be
switched over for the room temperature (switching
between day and night value equired according to
setting in Regulation circuit 1 menu item.
EN
13
ENGLISH