Setting Camera Order - HIKVISION HK-RA208 Series User Manual

Setting Camera Order

Setting the camera order allows you to logically position cameras for more efficient monitoring of your own
individual location.
To set the camera order:
1. Enter the Display Configuration menu, shown in Figure 19 by going to Main Menu > System Configuration
> Display Configuration.
2. Select the Video Output to configure camera order for.
3. Select the Screen Configuration you would like to use in Live Feed. The preview of the screen configuration
on the right will change depending on the option selected.
4. Each display in the preview of the screen configuration will have a selection box containing a list of the
different cameras that are available on the DVR. Pressing the up and down button of each selection box, select the
camera you would like to show in the particular display. Selecting 'X' will disable the display.
5. Click the Previous and Next button to go to the next set of displays for the selected screen configuration. For
example, in 2x2 screen configuration mode, pressing the Next button will bring up the next set of 4 displays.
6. Click the save button to Save settings.
7. Repeat steps 2-6 to adjust the camera order for other video outputs.
8. Click the Exit button to exit out of the menu.
Note: You must click the Save button after adjusting the order of one video output before you
are able to move on to adjust another one.
Hikvision USA, Inc. – Series HK-RA208/216 User Manual
Figure 20. Camera Order Setting
26