Table of Contents
Advertisement
• Switching to the corresponding channel in Preview or PTZ Control mode.
• Inputting numbers and characters in Edit mode.
• Switching between different channels in Playback mode.
5. Control Buttons:
• ESC Button: The ESC button is used to escape to the previous menu and to arm/disarm the DVR in Preview
mode.
• REC/SHOT Button: The REC/SHOT button is used to enter the Manual Record interface. If used when
controlling a PTZ, pressing the REC/SHOT button and then a Numeric button will call a PTZ preset.
• PLAY/AUTO Button: The PLAY/AUTO button is used to enter the Playback menu. It is also used to turn
audio on/off in the Playback menu and auto scan in the PTZ Control menu.
• ZOOM+ Button: The ZOOM+ button is used to zoom the PTZ camera in when the PTZ control menu.
•A/FOCUS+ Button: A/FOCUS+ button is used to adjust focus in the PTZ Control menu. It is also used to
switch between input methods (upper and lowercase alphabet, symbols and numeric input). It can also be used to
clear entire masked areas, such as in the Motion Detection and Privacy Mask menus.
•EDIT / IRIS+ Button: The EDIT / IFIS+ button is used to edit text fields. When editing text fields, it will
also function as a Backspace button to delete the character in front of the cursor. On checkbox fields, pressing the
EDIT / IRIS+ button will tick the checkbox. In PTX control mode, the EDIT / IRIS+ button opens up the iris of the
camera. In playback mode, it can be used to generate video clips for backup.
•MENU / WIPER Button: Pressing the MENU / WIPER button will return the user to the Main menu (after
successful login). Pressing and holding the button for 5 seconds will turn off audible key beep. The MENU /
WIPER button will also bring up Sensitivity Interface settings. In PTZ Control mode, the MENU / WIPER button
wills tart the wiper (if applicable).
• F1/LIGHT Button: The F1/LIGHT button when used in a list field will select all items on the list. In PTZ
Control mode, it will turn on/off PTZ light.
• F2/AUX Button: The F2/AUX button is used to cycle through tab pages. It will also bring up the Channel &
OSD Position settings.
• MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to switch between main and spot
output. In PTZ Control mode, it can be used to zoom the camera out.
• PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch between single screen and multi-
screen mode. In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button. It can
also be used to select entire masked areas, such as in Motion Detection and Privacy Mask menus.
• PTZ/IRIS- Button: The PTZ/IRIS- button is used to enter the PTZ Control mode. When in the PTZ Control
mode, it is used to close the iris of the PTZ
6. DIRECTION/ENTER Buttons:
• DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items in
menus. In Playback mode, the Up and Down button is used to fast-forward and rewind recorded video. The Left and
Right button will select the next and previous day of recordings. In Preview mode, these buttons can be used to
cycle through channels.
• ENTER Button: The ENTER button is used to confirm selection in any off the menu modes. It can also be
used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In Single Play mode,
pressing the ENTER button will advance the video by a single frame.
7. CD/DVD Slot: For use with internal CD/DVD writer.
Note: If GUARD indicator is blue (default), all alarm event and exception settings are valid. Otherwise, alarm
event and exception settings will be invalid, but normal recording will still be available.
Note: It is important to note that you must click the EDIT button on either the remote or front panel on a text
field before you're able to edit its content. After you're done entering text, you must hit the ENTER button to be
able to move on to the next field.
Hikvision USA, Inc. – Series HK-RA208/216 User Manual
10
Advertisement
Table of Contents
