Backing Up Video Clips - HIKVISION HK-RA208 Series User Manual

8. You may play the video clip using the Play Clip button or use the arrow keys shown next to the clip time
range to progress through the video one second, minute or hour at a time.
9. Click the Save Clip button to save clip to the DVR. Clip must be first saved to the DVR before it can be
backed up to an external USB storage device or to a DVD writer. Clicking the Clear Clip button will remove the
video clip.
10. Repeat steps 2-7 to select additional clips. If you would like to backup video clips at this point, click the
Backup button.
Note: The Play Clip, Save Clip and Clear Clip buttons are not available unless a completed video clip is
selected. A completed video clip has a start and end point marked by using the Start Clip and End Clip button.
Note: The Start Clip button is not available when there is still a video clip that has not been saved or cleared.

Backing Up Video Clips

After video clips have been selected in the Playback Interface (See Selecting Video Clips on page 46), you may
back them up to an external USB storage device or DVD writer by going to the Backup menu.
To backup video clips:
1. Enter the Clips Backup menu, shown in Figure 34 by first going to Main Menu > Playback. In the Playback
menu, click the Clips Backup button.
2. If video clips were successfully saved to the HDD using the Playback Interface, they will be listed under the
Backup Clips heading on the left hand side of the menu. The camera number as well as the time range would be
listed.
3. Select the video clips you would like to backup by checking the checkbox next to the desired clips. You may
also click the Play icon to play and review the clip. Video clips can be deleted by selecting it and clicking the
Remove button or by clicking the Remove All button to delete all clips.
Hikvision USA, Inc. – Series HK-RA208/216 User Manual
Figure 33. Video Clip Time Range
Figure 34. Clips Backup Menu
38