Backing Up Video Clips; Selecting Video Clips - HIKVISION HK-RA208 Series User Manual

Backing Up Video Clips

Video clips can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer.

Selecting Video Clips

Video clips can be selected for backup in the Playback Interface using the controls found in the Mark Clip For
Backup panel, shown in Figure 31.
Start Clip
The controls found in the Mark Clip For Backup panel includes:
• Start Clip Button: Mark the starting point for the video clip.
• Stop Clip Button: Mark the ending point for the video clip.
• Play Clip Button: Play the selected video clip.
• Save Clip Button: Save the selected video clip to the HDD.
• Clear Clip Button: Clear the selected video clip.
To select video clips in the Playback Interface:
1. Enter the Playback Interface, shown in Figure 32 by going to Main Menu > Playback.
2. Search for the recorded files that you would like to select video clips from (See Searching for Recorded Files
on page 33). Video clips can only be selected in single playback mode.
3. Select the starting position of the video clip by clicking the desired location on the blue recordings bar.
4. Click the Start Clip button.
5. Select the ending position of the video clip.
6. Click the stop Clip button.
7. The selected video clip time range will be shown at the bottom of the Playback Interface, as seen in Figure
33.
Hikvision USA, Inc. – Series HK-RA208/216 User Manual
Play Clip Stop Clip
Figure 31. Mark Clip For Backup Controls
Figure 32. Playback Menu
Save Clip Clear Clip
37