Configuring Cameras - HIKVISION HK-RA208 Series User Manual

Configuring Cameras

Adding and Removing Analog Cameras
Analog cameras can be enabled and disabled in the Add/Remove Cameras menu.
To manage analog cameras:
1. Enter the Add/Remove Cameras menu, shown in Figure 47 by going to Main Menu > Cameras Setup >
Add/Remove Cameras.
2. Select the Analog tab. This will open the Analog Camera Management menu, shown in Figure 47.
3. To enable a camera, check the box below the camera number. To disable a camera, uncheck the box. You may
also check and uncheck All to enable and disable all cameras.
4. Select the Save button to save the camera settings and select Exit to return to the previous menu. Selecting
the Exit button without clicking Save will quit out of the menu without saving settings. Setting up Privacy Zones.
Privacy Zones can be setup to mask off sensitive or private areas in the field of view of a camera.
Hikvision USA, Inc. – Series HK-RA208/216 User Manual
Figure 47. Add/Remove Cameras > Analog Menu
52