Manual Lock Programming; Credential Types; Programming Legend; Add Or Change A Master Programming Credential - Schlage CO-200 Instruction Manual

CO-200 Offl ine Lock User Guide
Left LED
!
When adding a card credential, the 3-6 digit code (PIN) entered prior to presenting the card
becomes the credential reference number. This number can be used to delete a card without
physically having the card. Keep a log of all issued credential reference numbers and codes
for future reference.

Credential Types

Credential Type
Programming
Normal Use
Normal Use +PIN
Toggle
Toggle +PIN
Freeze
Freeze +PIN
Pass-Through
Pass-Through +PIN

Programming Legend

Symbol
[Programming Code]
Programming Card
[PIN]
-
1 Programming codes such as 1-1-1 or 1-2-3-4 can be easily selected by non-authorized
users and should not be used.

MANUAL LOCK PROGRAMMING

Right LED
Used to program the lock – does not unlock the lock Five-digit code OR card
Unlocks the lock
Changes the state of the lock from locked to
unlocked, or vice versa, unless in a Freeze state
Freezes the lock in the current state – lock remains
frozen until Freeze credential is presented again
Unlocks a lock momentarily, regardless of state
Overrides a lock in Freeze state
Five-digit code, identical to programming credential
1
code listed in the Credential Types table.
Programming Card, identical to programming
credential card listed in the Credential Types table.
Three- to Six-digit code. A PIN can be any of the
PIN code types listed in the Credential Types table.
A PIN entered before a card credential becomes the
credential reference number.
Asterisk key on the keypad
Number keys on the keypad
Schlage button
The Schlage button has two different
LEDs, one on the left and one on the right.
All locks have a default programming
code of 97531 and "
All locks have a default normal use
code of 13579 and "#".
Function
Description
6
TIPS
".
*
Description
PIN (3 - 6 digits) OR card
PIN (3 - 6 digits) AND card
PIN (3 - 6 digits) OR card
PIN (3 - 6 digits) AND card
PIN (3 - 6 digits) OR card
PIN (3 - 6 digits) AND card
PIN (3 - 6 digits) OR card
PIN (3 - 6 digits) AND card
TIP
Use the same
programming code
for all locks in the
facility.