Manual Lock Programming; Credential Types; Programming Legend - Schlage CO-100 User Manual

Credential Types

Credential Type
Programming
Normal Use
Toggle
Freeze
Pass-Through

Programming Legend

Symbol
[Programming Code]
[PIN]
-
1 Programming codes such as 1-1-1 or 1-2-3-4 can be easily selected by non-authorized
users and should not be used.

MANUAL LOCK PROGRAMMING

Left LED
Function
Used to program the lock – does not
unlock the lock
Unlocks the lock
Changes the state of the lock unless in
Freeze state
Maintains the lock in current state until
Freeze PIN is entered again
Unlocks a lock momentarily, regardless
of state
Five-digit code, identical to programming credential
1
code listed in the Credential Types table.
Three- to Six-digit code. A PIN can be any of the PIN
code types listed in the Credential Types table.
Asterisk key on the keypad
Number keys on the keypad
Schlage button
CO-100 Offl ine Lock User Guide
Right LED
Description
5
Description
Five-digit code
PIN (3 - 6 digits)
PIN (3 - 6 digits)
PIN (3 - 6 digits)
PIN (3 - 6 digits)
Use the same
programming code
for all locks in the
facility.
Default PIN
97531 and
13579 and
TIP