CO-200 Offl ine Lock User Guide
Most LED indicators are confi gured with the HHD. See Schlage Utility Software (SUS) User Guide for
more information.
Schlage Button
Access denied
Access denied, user outside time zone
Factory default reset
Waiting for PIN
Low battery indicator, AA batteries
Low battery indicator, coin cell battery
Momentary unsecured access
USB active with no physical connection
Optional Inside Push Button (IPB)
Offi ce Mode –Allows lock to toggle between locked (normal) and unlocked state
Press IPB to lock
Press IPB to unlock
Privacy Mode – Allows the lock to toggle between normal access and a state in which normal
credentials are ignored
With door closed, press IPB to engage privacy
With door closed, press IPB to release privacy
1 Unlocking the lock with the IPB will cause the lock to remain unlocked until the IPB is depressed again.
2 On locks confi gured with a mortise-deadbolt, throwing the deadbolt will also engage privacy.
3 If DPS is used, then opening door will also release privacy. If a mortise-deadbolt is used, then retracting the
deadbolt will also release privacy.
For troubleshooting, visit to www.schlage.com/support.
LED REFERENCE
Condition
Action
1
TROUBLESHOOTING
2 red blinks
4 red blinks
One-second solid green with one-second beep
Mode 0 only: 5 left red with right green blinks,
then solid right green
9 left red blinks
9 right red blinks
1 green blink, then one red blink on relock
Left green blinking
1 red blink
1 green blink
2
4 green blinks
3
4 red blinks
12
Lights
Lights