Adjusting The Brightness Of The Display; Using The Power Saving Function - Pentax X-5 Operating Manual

Adjusting the Brightness of the Display

You can adjust the brightness of the display.
1
Use the four-way controller (23) to select [Brightness
Level] in the [W Setting] menu.
2
Use the four-way controller (45) to adjust the
brightness.
F
G
H
3
Press the 3 button.
The camera returns to Q mode.
The display appears with the set brightness.

Using the Power Saving Function

You can save battery power by setting the display to dim automatically
6
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness if any button is pressed.
1
Use the four-way controller (23) to select [Power
Saving] in the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the time
until the camera enters power saving mode.
Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].
4
Press the 4 button.
The setting is saved.
176
Dark
Normal
Bright