Editing Movies - Pentax X-5 Operating Manual

To Use a New Frame
Frames downloaded from the PENTAX website or other source can be
used for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the
built-in memory or on the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to the PENTAX website.

Editing Movies

You can extract a frame from the recorded movie to save as a still
picture, divide a movie into two, or add a title picture to a movie.
1
In Q mode, use the four-way controller (45) to
choose the movie you want to edit.
2
Use the four-way controller (2345) to select [
(Movie Edit) from the Playback Mode Palette.
3
Press the 4 button.
The movie editing selection screen
appears.
Subsequent steps vary depending on your
selection.
To Save a Frame from a Movie as a Still Picture
4
Select [Save as Still Image] on the movie editing
selection screen.
5
Press the 4 button.
The screen for selecting a frame to be saved as a still picture appears.
Save as Still Image
Divide Movies Divide Movies
Adding title picture Adding title picture
Cancel Cancel
OK OK
OK
5
153