Pentax X-5 Operating Manual page 37

Battery/card cover lock lever
1
Make sure that the camera is turned off and open the
battery/card cover.
1 Slide the battery/card cover lock lever in the direction of the arrow
to unlock.
2 Slide the battery/card cover in the direction of the arrow to open the
cover.
2
Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing the lens side of the
camera.
Push the card in until it clicks. Data may not be recorded correctly if the
card is not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
3
Close the battery/card cover.
While steadying the whole battery/card cover with your hands, press
to slide it in the opposite direction of 2 until it clicks.
Close the battery/card cover, and slide the battery/card cover lock
lever in the opposite direction of 1 to lock.
Battery/card cover
SD Memory Card
1
35