Control Change Assign - Edirol PCR-M1 Owner's Manual

CONTROL CHANGE ASSIGN

Here's how to assign a control change message to a controller.
Mode
Basic mode
Advanced mode 1
Advanced mode 2
● Basic mode
fig.edt2
1
Press the [EDIT] button.
The display will indicate "EDT".
fig.r-1
2
Slightly move the controller to which you want to assign a Control Change
message. In the case of a button, press that button.
The display will indicate the number of the selected controller.
3
Confirm what's indicated, and press the [ENTER] button.
fig.cc0
4
Press an ASSIGNABLE FUNCTION key (
to get "CC0" to appear in the display.
fig.c
5
Confirm what's indicated, and press the [ENTER] button.
The display will indicate "C–".
6
Input the channel. Use the [VALUE] dial, the [DEC] [INC] buttons, or the [0] - [F] keys to
specify the channel.
fig.n
7
Press the [ENTER] button.
The display will indicate "N–".
8
Use the [VALUE] dial, the [DEC] [INC] buttons, or the [0] - [F] keys to specify the control
change number.
9
Press the [ENTER] button.
10
If you are making an assignment for a button, specify the button mode.
(➝Specifying the button mode (p. 59))
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
keyboard Value range
0 00–7FH
1 Upper and lower limits are
assignable
2 Simulates a rotary encoder
Port
PORT 1
Assignable
Assignable
) on the keyboard enough times
Use MIDI functionality
*1 Reference
*1 Reference
65