Using F-1 Net Control; Starting F-1 Net Control - Edirol F-1 Owner's Manual

Using F-1 Net Control

This is a program for starting and stopping recording on the F-1 from a remote location. It is installed and set up at the same time as the F-1 Utility
(Browser or Editor).

Starting F-1 Net Control

With the F-1 Utility Browser and Editor, starting one program enables you to switch to and use the other one at any time, but F-1 Net Control
must be started separately.
1.
Connect the F-1 to the computer using an Ethernet (LAN) cable.
While the F-1 Utility connects to your computer via USB, this F-1 Net Control software communicates via Ethernet cable. For information on
how to make the connection, refer to the owner's manual for the F-1.
fig.LAN-connect.eps
Ethernet Connection
2.
Starting F-1 Net Control
From the "Start" menu on the computer, select "F-1 Net Control." Alternatively, double-click the "F-1 Net Control" shortcut icon created on
the desktop in Windows. This starts F-1 Net Control.
fig.start-netcontrol.eps
4