Control Change Assign - Edirol PCR-M30 Owner's Manual

CONTROL CHANGE ASSIGN

Here's how to assign a control change message to a controller.
Mode
Basic mode
Advanced mode 1
Advanced mode 2
■ Basic mode
fig.edt
1
Press the [EDIT] button.
The display will indicate "EDT."
fig.r-1
2
Slightly move the controller to which you want to assign a Control Change
message. In the case of a button, press that button.
The display will indicate the number of the selected controller.
3
Confirm what's indicated, and press the [ENTER] button.
fig.cc0
4
Press the [CONTROL CHANGE] key.
The display will indicate "CC0."
fig.c
5
Confirm what's indicated, and press the [ENTER] button.
The display will indicate "C–."
6
Input the channel. Use the [DEC][INC] buttons or the [0]-[F] keys to specify
the channel.
fig.n
7
Press the [ENTER] button.
The display will indicate "N–."
8
Use the [DEC][INC] buttons or the [0]-[F] keys to specify the control change
number.
9
Press the [ENTER] button.
10
If you are making an assignment for a button, specify the button mode.
(➔"Specifying the button mode" (p. 59))
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
keyboard
0 0-127(00-7FH)
1 Upper and lower limits are assignable
2 Simulates a rotary encoder
Value range
Use MIDI functionality
Port
PORT 1
Assignable
Assignable
*1 Reference
*1 Reference
63