Grizzly G5394 Owner's Manual page 25

Workstops
The belt speed on the Model G5394 is 3500
FPM, or nearly 40 MPH. A workpiece ejected
at this speed could cause serious personal
injury and property damage. Always use the
workstops and be sure they are in the cor-
rect position and secured before using the
machine.
To position the workstops:
1.
Figure 34
2.
Figure 34. Table workstop.
Platen Press
To rotate the platen press handle:
1.
Figure 35. Platen press.
2.
3.
Figure 35