Package Contents; Front Wheel & Brake - X-TREME XB-610 Owner's Manual

Electric moped
Table of Contents

Advertisement

Package Contents:

Electric Bicycle
48V 20AH Charger
Left & Right Mirrors
Front Tire
Front Fender
Left & Right Foot Pedals
Ignition Keys
Foot Pad
Trunk
User Manual
A. Remove the cardboard carton exposing the steel frame crate.
B.
Remove the bolts holding the top and side center post on the steel frame. Remove the top &
center post and set aside. See page 9 number 2-1
C.
Bend the front and back frame sides down to the ground so they are out of the way.
D. To assist with assembling the front wheel remove the wire ties holding the front axle (leave
the rear axle wire ties connected for stability).
E.
Remove all protective packaging.
F.
Remove Axle from front fork & shipping crate and set aside, do not discard.
G. Find a solid square object about 10" to 12" high and with assistance raise the front of the bike
and place it under the floor board battery compartment. This will allow for easier front wheel
installation.
H. Remove bolt from handle bar stem and place handle bars onto steering shaft. This will give
extra brake cable length for installing the brake drum on the wheel and fork.
I.
Remove the screw holding the front brake assembly on the fork.
Install front wheel and brakes per instructions below – Page 8
Preparation for Assembly
8

Advertisement

Table of Contents
loading

Table of Contents